Monday, October 22, 2018

28th and 29th Regiments of the Line

There is a great story behind these figures, one that underscores the particular generosity of spirit that I think defines this crazy hobby. A few years ago I started to paint and post my adventures around creating armies for and gaming the battles of the Peninsular War. On a few occasions I bemoaned the fact that I could no longer get my hands on the HaT Peninsular British set, and even went so far as to a fairly extensive conversion of Italeri figures, which you can see here.
But Mark Flack on the TMP forum had seen me mention this lack and took it on himself to contact me and make me an offer I couldn't refuse - a couple of sets of these figures that he had purchased and realized he would never paint. He went to a great deal of trouble to get my address and mail them to me - from Britain to Canada! - and I know did the same for another collector who lives even further away (although, as it turns out, with a better postal system).
The outcome was the arrival in my post box of two complete sets of Peninsular British and even a couple of sprues of command stands thrown in for good measure.

I have finally completed my first two regiments of these figures and the detailing and poses have not disappointed. I have made a few very minor conversions of some of the flank company figures to centre companies, but outside of that, I have only needed to create a couple of standard bearers, as I was short these. I read the good news that HaT will be re-releasing the British command set soon and hope that is the case as I continue with the painting!
So thank you, Mark, for these figures and I hope I have done them credit!

In expanding my British Peninsular army I have decided to try and get three token regiments for each of the British divisions painted (in the rule set I play, a British brigade is represented by about six stands of figures). For the 2nd Division I already had the 3rd Buffs and decided on the 28th North Gloucestershire and 29th Worcestershire regiments to flesh out this division.

28th North Gloucestershire Regiment of Foot

The 28th was originally raised as Sir John Gibson's Regiment of Foot in 1694, being redesignated the 28th Regiment of Foot in 1751 during the War of the Austrian Succession. It fought at the Battle of Louisburg in 1758, and on the Plains of Abraham at Quebec in 1759, the second obviously being a seminal event for a Canadian such as myself!

Because I generally am painting six stand regiments (24 figures) I dedicate two figures right and left to represent the flank companies. I decided to add one of the excellent HaT buglers to the 28th's light infantry figures on this stand.


During the Napoleonic wars they were part of the British expeditionary force sent to Egypt in 1801. It saw action in Denmark in 1807 and was part of Moore's force in Portugal in 1808-09, fighting at the Battle of Corunna.

28th Command stand. As I mentioned, I was short of command stand figures so the ensign on the left began life as the Saxon ensign below before it fell under the knife. Much too much work! I will have to wait for the re-release of the British Command set before I go much further.




28th Command stand from rear.


A detachment stayed behind and was engaged at Talavera while the rest of the regiment was involved in the Walcheren campaign. The regiment returned to the Peninsula in January, 1810 and fought at the battle of Barrosa, an honour which they wore on their shako cap badge at Waterloo. They stayed with Wellington's army throughout the Spanish campaign, seeing action at Arroyo dos Molinos, Vittoria, the Battle of the Pyrennes and on into France.


29th Worcestershire Regiment of Foot

And now to the 29th. Also raised in 1694 by Colonel Thomas Farrington it was amalgamated with the 36th (Herfordshire) Regiment to become the first battalion of the Worcestershire Regiment in 1782. It too was in British North America, clearing the land in 1749 for the new town of Halifax. They also had the unfortunate distinction of drawing first blood in the American Revolution, participating in the Boston massacre of 1770.

This Command stand was a bit easier, with only slight alterations to change the marching command figure (right ensign) into an ensign.

The 29th began the Napoleonic wars serving as marines for the Royal Navy and later joined Wellesley's army in Portugal and Spain in 1808, participating in the Battles of Roliça, Vimeiro and Talavera. They also saw action at the battle of Albuera, making them present at most of the significant British battles in the Peninsula in the early years. After Albuera, due to heavy losses, they were sent back to England for more recruitment.

Centre company stand front.

Centre company stand rear.

In 1814 they were shipped to Nova Scotia, returning for the Hundred Days campaign but arriving after the Battle of Waterloo.
An interesting bit of regimental history I read while researching this regiment was that ten black youths were given to the regiment and having been subsequently released from their slavery joined the regiment as drummers. The tradition of black drummers continued until 1843, inspiring me to go back and repaint my drummer on the 29th command stand.

Learning that the 29th had a tradition of black drummers I of course had to revisit this stand!



13 comments:

  1. Bill, it was my pleasure. I ended up feeling guilty as, just after we had sorted these, HaT re-released the damn set 😊😊😊. But good to see your work - you have such a distinctive style that really makes these figures “pop”.

    ReplyDelete
    Replies
    1. Really? Re-released? I had heard about the command set but not the infantry. Regardless I have not yet seen them in my neighbourhood and am so pleased to have these guys on my painting table.

      Delete
  2. Hi Bill! Excellent painting, and wonderful conversion on this flag bearer! Did you use green stuff ?

    ReplyDelete
    Replies
    1. Hi Phil,

      Yes green stuff. And a new head from the HaT set, lots of carving away of packs etc. and just reducing the size of some of the limbs on that lumpkin Saxon.

      Delete
  3. Very good painting. You probably know this but SHQ figures fit in well with HAT and they do British Peninsular artillery and a Line infantry command pack. Ask them for two ensigns in the pack as the deafult is an officer , sergeant with pike, drummer and an ensign.

    http://www.shqminiatures.co.uk/Ranges/20mmNapoleonics/napmain.php?UID=2018082305103266.249.64.44

    What will you use for cavalry? These are nice for Light Dragoons.

    http://www.plasticsoldierreview.com/Review.aspx?id=2111

    Unfortunately, HAT messed up the sizing so there are no British Heavy Dragoons unless you join in their crowdfunding or convert Revell/Italeri Prussian Dragoons.

    http://www.plasticsoldierreview.com/Review.aspx?id=450

    http://hat.freeforums.net/thread/415/adjustment-size-british-dragoons

    http://www.hat.com/CrowdBD.html

    There were other suppliers (NapoleoN and Qualiticast) but as rare as hen's teeth.



    ReplyDelete
  4. Thanks for these links. I wasn't aware of the SHQ Miniatures but you are right, they do fit well with the HaT. Hagen also do a British command set but it is pretty dear. And I do understand that HaT is re-releasing their command set, which may be the simplest solution if I get tired of converting figures to ensigns!
    I have been thinking of joining in with the crowd funding of the British cavalry - the figures look very good. I thought there was a set of heavy dragoons in the works as well. I have the set of the Prussian Dragoons and have been eye-balling them but they feel like they will need a fair bit of work to convert.

    ReplyDelete
  5. I can send you a picture of a British Peninsular SHQ unit next to a HAT one.

    Here is a picture of the Strelets Light dragoons.

    https://servicerationdistributionhobby.blogspot.com/2016/06/talavera-2-part-three.html?q=light+dragoon

    Regarding the Prussians, here is an a example of a repaint.
    http://www.rafaelpardoalmudi.com/albuera_cavalry.html

    I had forgotten that the HAT British dragoons come with 3 cocked hats. The tunic isn't quite correct but close enough and you could cast some more heads with modelling putty and an Oyumaru mould.

    http://www.plasticsoldierreview.com/Review.aspx?id=475

    ReplyDelete
  6. So nice to see all those beautiful Peninsular war figures!
    The Prussian repaints do look good. My main concern would be the lack of coat tails and lace, but I'm sure it would never be noticed.

    ReplyDelete
  7. Bravo! For the brave black drummer boys.BB

    ReplyDelete
  8. Great looking units, nice conversion work too.

    ReplyDelete
  9. The current HAT British Dragoons have a tunic that is about the right length. The older one with long tails was replaced in 1796. You would have to add lace across the chest (paint?)and being older, the detail on these isn't as good as the latest sculpts but they could work.

    ReplyDelete
  10. My local model shop has the HAT infantry in stock.

    ReplyDelete
  11. Very interesting! I have the same figures next in line. What are the measures of your bases? I base mine 32x32mm for infantry, 40x40mm for cavalry and artillery on large FOW bases. That means all measures in inches are doubled but in cm. 6 inches equals 12cm that way.

    ReplyDelete